Cree lamp Outdoor SMD LED Display Boards P8 High brightness and well radiating BK-P8 manufacturer from China Shenzhen BAKO Optoelectronics Co.,Ltd

Cree lamp Outdoor SMD LED Display Boards P8 High brightness and well radiating

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: BK-P8

P8 Cree lamp SMD Outdoor LED Display High brightness for advertising

P8 Cree lamp SMD Outdoor LED Display High brightness for advertising

Specifications:

Unit module	Pixel pitch	8 mm
	Pixel density(dots/sqm)	15625/sqm
	LED encapsulation	SMD3535
	Driving method	1/4
	Module size(mm)	256*256mm
	Resolution of module( dots)	32*32
Major technical parameters	Cabinet size	1024*1024mm
	Brightness	7500cd/
	Refresh rate	>2000HZ
	Color temperature	6500K
	View angle(H/V)	160°/140°
	Grey scale	16bit
	Brightness adjustment	256 grade/ Manually/ Automatically
	Working/ storage temperature	-20~50/ -30~60
	Working/ storage humidity	10~90 RH
	Working voltage	AC220/110V 50Hz
	Protect degree	IP65/IP54
	MTBF	>5000h
	Life span	100000h
	Input Signal	AV, S-VIDEO, VGA, DVI, HDMI, SDI, DP
	Operation system	Windows 7/XP
	Control distance	cat-5 data cable:<100m, optical fiber<15km

Quick details:

pitch: P8 mm

module resolution:32*32

module size: 256*256mm

cabinet size: 1024*1024mm

Description:

1. Good waterproof protection: Front is IP65 and back is IP54. Before ageing in factory, we make water proof test with pouring water. There is totally no problem for outdoor application.

2. Good color uniformity: Since 3 LED chips are encapsulated in one lamp, SMD color uniformity is much better than DIP so the showing effect is perfect.

3. Big view angle: SMD view angle is bigger than DIP.Its view angle is 160°for horizontal and 110°for vertical.

4. Anti-low temperature: for very cold areas such as Russian market, we should pay special attention

to the cold temperature. So we will use anti-low temperature power suppliers and special heat system to warm the display.

5. Good heat output system for high temperature: For hot ares, heat output system is specially important. Or else, the whole display will become hot and there will be dangerous. So we help clients to reduce current and also make add fans for screen.

6. Energy saving: power consumption is a key factor for LED billboard. BAKO’s LED display is designed with low power consumption to help clients to save energy.

7. High brightness: For outdoor application, brightness is important, especially if the LED display faces the sun directly. BAKO’s outdoor display brightness can be above 7500 nits, completely ensure the requirement for outdoor application.

8. Adjustable brightness: In the daytime, brightness should be high. But in the evening, it should be reduced for traffic safety. BAKO’s LED display can make the brightness adjusted automatically. Also, this method can help to save much energy.

9. Both front and rear service: For some special application, front service is a must. BAKO makes new design for SMD outdoor LED display. The design keeps good uniformation and prevent the gap between cabinets.

Competitive Advantage:

1) module frame and cabinet can be applied for both P8 and P12.8

2) there are always big size stock for urgent needs

3) clients can send engineer to our factory for free training

4) we can offer full solution for clients